On this page, you will find the study patterns for our MSc Building Information Modelling and Project Collaboration online (OLPBW) programme.
Please use the links below to move directly to the relevant study pattern for the term you are enrolling onto.
These study patterns highlight the modules that you will need study over the next 12 months. Please note that all students are required to re-enrol at the start of every academic year in September and so within your enrolment you can only choose modules for the current academic year.
The scheduled modules for the remainder of your programme (outlined below) are based on the current plan, however, the order of these may be subject to change. Should any changes be made, we will communicate this to you as soon as possible.
Please note that any optional modules are subject to viable group sizes. Should you choose a module that is deemed to be non-viable, you will be notified of the alternative available options.
Pace of your study
For students completing the programme at the standard rate of study, the required minimum number of study time is 20 hours per week.
If you opt to undertake the accelerated study plan whereby you will study two modules in one trimester, we recommend 40 hours of study per week.
Should you decide to study on the accelerated rate you must ensure that you have the capacity to fully engage with your studies and achieve the best grades and final award. You will need to balance approximately 40 hours of study per week alongside your professional and personal life and commitments.
It may be useful to consider studying one module at the standard rate of study before deciding whether to then increase to the accelerated rate of study.
MSc BIM and Project Collaboration - standard rate with September start
Study Pattern |
Autumn (September) |
Spring (January) |
Summer (May) |
Year 1 |
BIM and Integrated Project Collaboration (7AZ505) 20 credits
|
Research Methods, Application and Evaluation (Taught PG) (7TE510) 10 credits
Environmental Risk and Responsibility (7TE513) 10 credits
|
nD BIM – Costing, Project Planning and Design Management (7AZ506) 20 credits |
Year 2 |
Sustainable Design Analysis and Simulation (7AZ503) 20 credits |
Advanced Parametric Design, Customisation and Visualisation (7AZ507) 20 credits
|
Optional Module* 20 credits |
Year 3 |
Independent Scholarship (Technology) (7ME525) 60 credits |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
*Optional Modules: Project Planning Value Engineering and Risk Management (7BU504); Continuing Professional Development and Strategic Management (7ME524)
MSc BIM and Project Collaboration - accelerated rate with September start
Study Pattern |
Autumn (September) |
Spring (January) |
Summer (May) |
Year 1 |
BIM and Integrated Project Collaboration (7AZ505) 20 credits
Sustainable Design Analysis and Simulation (7AZ503) 20 credits
|
Research Methods, Application and Evaluation (Taught PG) (7TE510) 10 credits
Environmental Risk and Responsibility (7TE513) 10 credits
Advanced Parametric Design, Customisation and Visualisation (7AZ507) 20 credits
|
nD BIM – Costing, Project Planning and Design Management (7AZ506) 20 credits
Optional Module* 20 credits |
Year 2 |
Independent Scholarship (Technology) (7ME525) 60 credits |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
*Optional Modules: Project Planning Value Engineering and Risk Management (7BU504); Continuing Professional Development and Strategic Management (7ME524)
< Go back to the top of the page >
MSc BIM and Project Collaboration - standard rate with January start
Study Pattern |
Spring (January) |
Summer (May) |
Autumn (September) |
Year 1 |
Research Methods, Application and Evaluation (Taught PG) (7TE510) 10 credits
Environmental Risk and Responsibility (7TE513) 10 credits
|
nD BIM – Costing, Project Planning and Design Management (7AZ506) 20 credits
|
Sustainable Design Analysis and Simulation (7AZ503) 20 credits |
Year 2 |
Advanced Parametric Design, Customisation and Visualisation (7AZ507) 20 credits |
Optional Module* 20 credits
|
BIM and Integrated Project Collaboration (7AZ505) 20 credits |
Year 3 |
Independent Scholarship (Technology) (7ME525) 60 credits |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
*Optional Modules: Project Planning Value Engineering and Risk Management (7BU504); Continuing Professional Development and Strategic Management (7ME524)
MSc BIM and Project Collaboration - accelerated rate with January start
Study Pattern |
Spring (January) |
Summer (May) |
Autumn (September) |
Year 1 |
Research Methods, Application and Evaluation (Taught PG) (7TE510) 10 credits
Environmental Risk and Responsibility (7TE513) 10 credits
Advanced Parametric Design, Customisation and Visualisation (7AZ507) 20 credits
|
nD BIM – Costing, Project Planning and Design Management (7AZ506) 20 credits
Optional Module* 20 credits
|
Sustainable Design Analysis and Simulation (7AZ503) 20 credits
BIM and Integrated Project Collaboration (7AZ505) 20 credits
|
Year 2 |
Independent Scholarship (Technology) (7ME525) 60 credits |
Independent Scholarship (Technology) (7ME525) 60 credits continued
|
Independent Scholarship (Technology) (7ME525) 60 credits continued |
*Optional Modules: Project Planning Value Engineering and Risk Management (7BU504); Continuing Professional Development and Strategic Management (7ME524)
< Go back to the top of the page >
MSc BIM and Project Collaboration - standard rate with May start
Study Pattern |
Summer (May) |
Autumn (September) |
Spring (January) |
Year 1 |
nD BIM – Costing, Project Planning and Design Management (7AZ506) 20 credits |
Sustainable Design Analysis and Simulation (7AZ503) 20 credits |
Research Methods, Application and Evaluation (Taught PG) (7TE510) 10 credits
Environmental Risk and Responsibility (7TE513) 10 credits |
Year 2 |
Optional Module* 20 credits |
BIM and Integrated Project Collaboration (7AZ505) 20 credits |
Advanced Parametric Design, Customisation and Visualisation (7AZ507) 20 credits |
Year 3 |
Independent Scholarship (Technology) (7ME525) 60 credits |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
Independent Scholarship (Technology) (7ME525) 60 credits continued |
*Optional Modules: Project Planning Value Engineering and Risk Management (7BU504); Continuing Professional Development and Strategic Management (7ME524)
MSc BIM and Project Collaboration - accelerated rate with May start
Study Pattern |
Summer (May) |
Autumn (September) |
Spring (January) |
Year 1 |
nD BIM – Costing, Project Planning and Design Management (7AZ506) 20 credits
Optional Module* 20 credits
|
Sustainable Design Analysis and Simulation (7AZ503) 20 credits
BIM and Integrated Project Collaboration (7AZ505) 20 credits
|
Research Methods, Application and Evaluation (Taught PG) (7TE510) 10 credits
Environmental Risk and Responsibility (7TE513) 10 credits
Advanced Parametric Design, Customisation and Visualisation (7AZ507) 20 credits
|
Year 2 |
Independent Scholarship (Technology) (7ME525) 60 credits |
Independent Scholarship (Technology) (7ME525) 60 credits continued
|
Independent Scholarship (Technology) (7ME525) 60 credits continued |
*Optional Modules: Project Planning Value Engineering and Risk Management (7BU504); Continuing Professional Development and Strategic Management (7ME524)
< Go back to the top of the page >